|
12" Twin Roll-A-Ramp Wheelchair Ramps, the versatile new portable ramp system. A dual ramp, also called twin ramp, for wheelchair users and scooter users, who want an inexpensive option to expensive chair lifts, permanent ramps, or conversion vans or for ANY use requiring a superior quality ramp. Just roll it up. Imagine patients and clients having the freedom to visit friends and relatives in THEIR homes with these ramps.
Roll-A-Ramp
, the versatile new portable ramp system for wheelchair and scooter users who want an option to
expensive chair lifts, permanent ramps, or conversion vans. Or for ANY use requiring a superior quality ramp.
Imagine patients and clients having the freedom to visit friends and relatives in THEIR homes. It's so light, strong,
easy to use, and convenient that anyone needing an access solution will marvel at its unique design and top quality
construction. Wheelchair users and their caregivers will marvel as they enjoy newfound freedom.
Width
30-inch, 26-inch & 36" singlewide units, or 12" inch pair system with optional spacers to accommodate any
wheelchair.
Ramps are built to ANY length, so you get what you NEED not what's AVAILABLE.
|
|
|
Lengths
Unlimited!
Each ramp can be built for your own specific need. |
|
|
|
Stores easily
Just roll it up and go!
Each lightweight Roll-A-Ramp section rolls up quickly and can be
carried with the strap/handle.
Roll-A-Ramp stores easily in very little space.
Roll it up, fold it up, separate it and store it side by side. |
|
|
|
|
|
Approach Plates:
|
Each end of the Roll-A-Ramp has a
special
6" Approach Plate attached.
The purpose of this is to ensure a smooth entrance and exit to the ramp. |
|
This special Approach Plate is not load bearing meaning the top plate alone cannot rest on any surface while ramping.
|
 |
|
Note: It is important that when placing the ramp on the top surface that the Approach Plate plus the first ramp link rests on the surface.” |
|
Approach Plates
Order extra plates for when you want to separate a ramp into shorter sections. This allows you to have 2 or more complete ramp systems.
Longer home modular systems can have a short piece removed for a portable ramp, and then put back on to once again have a full system.
|
|
|
|
|
|
|
|
Superior Engineering
Adv
anced engineering techniques make Roll-A-Ramp® incredibly strong yet lightweight,
similar to that of a bridge |
|
|
|
STRENGTH
Fabricated from strong 6061 Aircraft Quality Anodized Aluminum, Roll-A-Ramp supports up to
2,000 lbs
of distributed weight! |
|
|
|
Roll-A-Ramp
Accommodates all brands of manual or electric wheelchairs, or any piece of equipment needing a ramp.
Four (4) widths to choose from. |
|
|
|
NEVER PERMANENT
No m
atter how the system is configured; short portable ramp to extensive modular ramp,
to vehicle-mounted application, your
Roll-A-Ramp
ALWAYS remains portable. |
Unique Design -
Patent
ed link construction means you will never have the wrong size ramp;
simply add additional l
inks to change length
with simple tools provided
with your ramp.
Versatile
One
Ramp -
Man
y Uses. Use the same ramp to go from home to friends to vehicle with ease.
No need to purchase multiple ramps.
Additional Links
Quickly and easily add length to any Roll-A-Ramp® in 1 foot increments, using the tools provided with the ramp. Sections are completely assembled ready to put on. Your ramp never becomes obsolete & is a lifetime system. Use with Positive Lock Pins
TM
to quickly separate ramp into small sections.
Easily separate ramp with innovative release pin.
Any
ramp of
any
length
can be
quickly
and
easily
separated into shorter, easier-to-handle sections;
this provides you
with multiple
ramps for multiple uses! Recommended for 8ft and over to seperate the ramp.
Center Support Stands
Recommended for ramp lengths over 12 feet. Easily mounted to the side rails from underneath, they add stability to your Roll-A-Ramp® when a longer
ramp is needed or required. Simply lift ramp from lower base of stand leaving upper piece attached for portability. Ramp can still be rolled up.
14" -27" Shown Above
6" - 15" Shown Above
This pair of brackets allow for easy mounting to any landing surface. The ramp's approach plate simply slips in & removes in seconds.
Brackets not necessary for all applications & are optional. Using these your ramp can be installed to be level with the surface of your landing.
|
Pickup Tailgate Brackets
Brackets easily rivet or screw to tailgate, any surface where you need a little extra holding power. Popular for loading into pickups.
Low profile does not interfere with normal use.
|
|
|
These special approach plates replace the standard ones, are load bearing and designed for use when you need to place the end of the ramp
directly on the landing surface; threshold, van sill, etc. Helps to maximize the usable ramp length and also give the most clearance for vans.
12" Universal Van Mount Brackets
Used for mounting the 12" Roll-A-Ramp pair set into the side door of most vans. Brackets bolt to floor, and ramps may be quickly removed with
the Positive Lock Pins® included
Spacers
Spacers are used with the 12" pair. Spacers provide security by getting the ramp width the same. Spacers easily snap into place
on the ramp's safety rails. 2", 5"or 8" available.
High-tensile strength anodized aerospace Aluminum (Clear Color)
|
Durable Designed and built for years of rugged use. |
|
Portable Each lightweight section rolls up or folds quickly. Includes strap/handle for easy transport and storage. |
|
|
Strong Supports 1000-2000 lbs! Made of revolutionary new high-tensile strength anodized aerospace aluminum. |
|
|
Adjustable Length Additional links can be added with simple tools provided. |
|
|
Safe Built-in safety rails ensure user safety. |
|
|
|
Smooth on and off Each end slopes gradually for easy, jar-free access. |
|
|
Versatile Easily separate smaller sections from a long modular system for use as a portable ramp. Multiple ramps in one |
|
|
|
|
Roll-A-Ramp is the option for wheelchair and scooter users that want the access without the cost of a chair lift. |
|
|
Allows access to your vehicle and can transfer to an entry ramp for your house in minutes. |
|
|
Light weight with incredible load rating, up to 1 ton. |
|
|
Conveniently stores in most cars and vans. Rolls up for easy storage and transport. Converts from a roll up ramp to a folding ramp. |
|
|
Engineered for a smooth entry and exit with all wheelchair styles. |
|
|
portable wheelchair scooter vehicle access ramps and accessories
|
The Product comes with a 10 Year Warranty.
** Note - Load bearing length is one foot less than ordered length. Therefore,
if you need a 10' load bearing length you must order 11' total length
|
|
